Dell PowerConnect PC5524 User Manual

711
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\ACL.fm
DELL CONFIDENTIAL – PRELIMINARY 2012 - FOR PROOF ONLY
console(config-if)# service-acl input server
service-acl output
Use the service-acl output command in Interface Configuration mode to
control access to an interface on the Egress (transmit path). Use the no form
of this command to remove the access control..
Syntax
service-acl output acl-name1 [acl-name2]
no service-acl output
Parameters
acl-name—Specifies an ACL to apply to the interface. See the Usage
Guidelines. Range: acl-name –32 characters. Use "" for empty string
Default
No ACL is assigned.
Command Mode
Interface Configuration (Ethernet, Port-Channel) mode.
Interface Configuration (Ethernet, VLAN, Port-Channel) mode.
User Guidelines
The deny rule actions: log-input and disable-port are not supported. Trying to
use these actions will result in an error.
IPv4 ACLs and IPv6 ACLs can be bound together on an interface.
A MAC ACL cannot be bound on an interface together with an IPv4 ACL or
IPv6 ACL.
Two ACLs of the same type cannot be added to a port.
An ACL cannot be added to a port that is already bound to an ACL, without
first removing the current ACL and binding the two ACLs together
Example

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English