Dell PowerConnect PC5524 User Manual

666 DHCP Server Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\DCHP_Server.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Example
The following example specifies yahoo.com as the DHCP client domain
name string.
Console(config-dhcp)# domain-name yahoo.com
netbios-name-server
Use the netbios-name-server DHCP Pool Configuration mode command to
configure the NetBIOS Windows Internet Naming Service (WINS) servers
that are available to Microsoft Dynamic Host Configuration Protocol
(DHCP) clients. Use the no form of this command to remove the NetBIOS
name server list.
Syntax
netbios-name-server ip-address [ ip-address2 ... ip-address8 ]
no netbios-name-server
Parameters
ip-address—Specifies the NetBIOS WINS name server IP address. One IP
address is required, although up to eight addresses can be specified in one
command line.
Command Mode
DHCP Pool Host Configuration mode
DHCP Pool Network Configuration mode
Default Configuration
No bios server is defined.
Example
The following example specifies the IP address of a NetBIOS name server
available to the DHCP client.
Console(config-dhcp)# netbios-name-server 10.12.1.90

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English