Dell PowerConnect PC5524 User Manual

654 DHCP Relay Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\DCHP_Relay.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
You can use the command regardless if DHCP Relay is enabled on the
interface.
Example
The following example defines the DHCP server on VLAN 21.
Console(config)# interface vlan 21
Console(config-if)#
ip dhcp relay address 176.16.1.1
show ip dhcp relay
Use the show ip dhcp relay EXEC mode command to display the server
addresses on the DHCP relay.
Syntax
show ip dhcp relay
Command Mode
EXEC mode
Example
The following example displays the server addresses on the DHCP relay.
Console> show ip dhcp relay
DHCP relay is globally enabled.
DHCP relay is enabled on VLANs: 1, 2
DHCP relay is enabled on ports: 1/1
DHCP relay is enabled on port-channels:
Servers: 172.16.1.11, 172.16.8.11
Console> show ip dhcp relay

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English