LLDP Commands 451
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\LLDP.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
show lldp statistics
Use the show lldp statistics EXEC mode command to display the Link Layer
Discovery Protocol (LLDP) statistics.
Syntax
show lldp statistics
[interface-id]
Parameters
interface-id—Specifies an interface ID. The interface ID must be an
Ethernet port.
Command Mode
EXEC mode
Example
Switch# show lldp statistics
Contax(config-if)# do show lldp statistics
Tables Last Change Time: 14-Oct-2010 32:08:18
Tables Inserts: 26
Tab l e s Del e te s: 2
Tables Dropped: 0
Tables Ageouts: 1
Power value The total power in watts required by a PD device from
a PSE device, or the total power a PSE device is
capable of sourcing over a maximum length cable
based on its current configuration.
LLDP MED - Location
Coordinates, Civic
address, ECS ELIN.
The location information raw data.
To Next Page
Loading...
Need help?
General