Dell PowerConnect PC5524 User Manual

616 IP Addressing Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\IP_Addressing.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Example
The following example defines a preference for an IP address as a source IP
address for DHCP relayed messages on an interface.
Console (config-ip)# source-precedence
ip domain lookup
Use the ip domain lookup Global Configuration mode command to enable
the IP Domain Name System (DNS)-based host name-to-address translation.
Use the no form of this command to disable DNS-based host name-to-
address translation.
Syntax
ip domain lookup
no ip domain lookup
Default Configuration
IP Domain Name System (DNS)-based host name-to-address translation is
enabled.
Command Mode
Global Configuration mode
Example
The following example enables IP Domain Name System (DNS)-based host
name-to-address translation.
Console(config)# ip domain lookup
ip domain name
Use the ip domain name Global Configuration mode command to define a
default domain name used by the software to complete unqualified host
names (names without a dotted-decimal domain name). Use the no form of
this command to remove the default domain name.

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English