Dell PowerConnect PC5524 User Manual

User Interface Commands 47
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\User_Interface.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Example
The following example enables the command history function for Telnet.
Console(config)# line telnet
Console(config-line)# history
history size
The history size Line Configuration mode command changes the command
history buffer size for a particular line. Use the no form of this command to
reset the command history buffer size to the default value.
Syntax
history size number-of-commands
no history size
Parameters
number-of-commands—Specifies the number of commands the system
records in its history buffer. (Range: 0–
256)
Default Configuration
The default command history buffer size is 10 commands.
Command Mode
Line Configuration mode
User Guidelines
This command configures the command history buffer size for a particular
line. Use the terminal history size EXEC mode command to configure the
command history buffer size for the current terminal session.
The allocated command history buffer is per terminal user, and is taken from
a shared buffer. If there is not enough space available in the shared buffer, the
command history buffer size () cannot be increased above the default size.

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English