Dell PowerConnect PC5524 User Manual

LLDP Commands 431
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\LLDP.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
notifications on an interface. Use the no form of this command to restore the
default configuration.
Syntax
lldp notifications {enable | disable}
no lldp notifications
Parameters
• enable —Enables sending LLDP notifications.
•
disable —Disables sending LLDP notifications.
Default Configuration
Sending LLDP notifications is disabled.
Command Mode
Interface Configuration (Ethernet) mode
Example
The following example enables sending LLDP notifications on
gigabitethernet port
1/0/ 5.
Console(config)# interface gigabitethernet 1/0/5
Console(config)# lldp notifications 10
lldp notifications interval
Use the lldp notifications interval Global Configuration mode command to
configure the maximum transmission rate of LLDP notifications. Use the no
form of this command to return to the default.
Syntax
lldp notifications interval seconds
no lldp notifications interval

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English