Dell PowerConnect PC5524 User Manual

DHCP Server Commands 663
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\DCHP_Server.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
client-name
Use the client-name DHCP Pool Host Configuration mode command to
define the name of a DHCP client. The client name should not include the
domain name. Use the no form of this command to remove the client name.
Syntax
client-name name
no client-name
Parameters
name—Specifies the client name, using standard ASCII characters. The
client name should not include the domain name. For example, the name
Mars should not be specified as mars.yahoo.com. (Length: 1–32 characters)
Command Mode
DHCP Pool Host Configuration mode
Default Coniguration
No client name is defined.
Example
The following example defines the string Client1 as the client name.
Console(config-dhcp)# client-name client1
default-router
Use the default-router DHCP Pool Configuration mode command to
configure the default router list for a Dynamic Host Configuration Protocol
(DHCP) client. Use the no form of this command to remove the default
router list.
Syntax
default-router ip-address [ ip-address2 ... ip-address8 ]
no default-router

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English