iSCSI Commands 595
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\iSCSI.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
User Guidelines
The new setting will take affect only after reset.
This command enables the user to define the number of iSCSI connections
supported in the system.
The amount of iSCSI sessions has effect on the system memory
consumption. The memory consumption is ~500 bytes per session and 20
bytes per connection (256 sessions each with 4 connections consumes
~145KB). In the current implementation, if more than 1024 connections
exist, you will still get QoS, but only 1024 connections will be displayed
show iscsi
Use the show iscsi Privileged EXEC mode command to display the iSCSI
configuration.
Syntax
show iscsi
Command Mode
Privileged EXEC mode
User Guidelines
The iSCSI targets displayed are the statically configured targets only.
To display all iSCSI entities (targets and initiators), whether statically
configured or dynamically discovered, use the show iscsi sessions command.
To Next Page
Loading...
Need help?
General