Dell PowerConnect PC5524 User Manual

Quality of Service (QoS) Commands 749
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\QoS.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Syntax
qos wrr-queue threshold gigabitethernet queue-id threshold-percentage
no qos wrr-queue threshold gigabitethernet queue-id
Parameters
• gigabitethernet —Specifies that the thresholds are to be applied to Gigabit
Ethernet ports.
•
queue-id —Specifies the queue number to which the tail-drop threshold is
assigned.
•
threshold-percentage —Specifies the queue threshold percentage value.
Default Configuration
The default threshold is 80 percent.
Command Mode
Global Configuration mode
User Guidelines
If the threshold is exceeded, packets with the corresponding DP are dropped
until the threshold is no longer exceeded.
Example
The following example assigns a threshold of 80 percent to WRR queue 1.
Console(config)# qos wrr-queue threshold gigabitethernet 1 80
qos map policed-dscp
Use the qos map policed-dscp Global Configuration mode command to
configure the policed-DSCP map for remarking purposes. Use the no form of
this command to restore the default configuration.
Syntax
qos map policed-dscp dscp-list to dscp-mark-down
no qos map policed-dscp [ dscp-list ]

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English