Dell PowerConnect PC5524 User Manual

214 Line Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Line.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
speed
The speed Line Configuration mode command sets the line baud rate. Use
the no form of this command to restore the default configuration.
Syntax
speed bps
no speed
Parameters
bps—Specifies the baud rate in bits per second (bps). Possible values are
2400, 4800, 9600, 19200, 38400, 57600, and 115200.
Default Configuration
The default speed is 9600 bps.
Command Mode
Line Configuration (console) mode
User Guidelines
The configured speed is applied when Autobaud is disabled. This
configuration applies to the current session only.
Example
The following example configures the line baud rate as 9600 bits per second.
Console(config-line)# speed 9600
autobaud
The autobaud Line Configuration mode command sets the line for
automatic baud rate detection (autobaud). Use the no form of this command
to disable automatic baud rate detection.
Syntax
autobaud

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English