50 User Interface Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\User_Interface.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
terminal datadump
The terminal datadump EXEC mode command enables dumping all the
output of a show command without prompting. Use the no form of this
command to disable dumping.
Syntax
terminal datadump
terminal no datadump
Default Configuration
Dumping is disabled.
Command Mode
EXEC mode
User Guidelines
By default, a More prompt is displayed when the output contains more lines
than can be displayed on the screen. Pressing the Enter key displays the next
line; pressing the Spacebar displays the next screen of output. The terminal
datadump command enables dumping all output immediately after entering
the show command.
This command is relevant only for the current session.
Example
The following example dumps all output immediately after entering a show
command.
Console>
terminal datadump
debug-mode
The debug-mode Privileged EXEC mode command mode switches to debug
mode.
To Next Page
Loading...
Need help?
General