Dell PowerConnect PC5524 User Manual

RADIUS Commands 255
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Radius.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
radius-server timeout
Use the radius-server timeout Global Configuration mode command to set
the time interval during which the device waits for a server host to reply. Use
the no form of this command to restore the default configuration.
Syntax
radius-server timeout timeout
no radius-server timeout
Parameters
timeout—Specifies the timeout value in seconds. (Range: 1–30)
Default Configuration
The default timeout value is 3 seconds.
Command Mode
Global Configuration mode
Example
The following example sets the timeout interval on all RADIUS servers to 5
seconds.
Console(config)# radius-server timeout 5
radius-server deadtime
Use the radius-server deadtime Global Configuration mode command to
configure the time interval during which unavailable RADIUS servers are
skipped over by transaction requests. This improves RADIUS response time
when servers are unavailable. Use the no form of this command to restore the
default configuration.
Syntax
radius-server deadtime deadtime
no radius-server deadtime

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English