Dell PowerConnect PC5524 - Clear Spanning-Tree Detected-Protocols; Spanning-Tree Mst Priority

Spanning-Tree Commands 467
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Spanning-Tree.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Example
The following example shuts down Ethernet port 1/0/ 5 when it receives a
BPDU.
Console(config)# interface gigabitethernet 1/0/5
Console(config-if)# spanning-tree bpduguard enable
clear spanning-tree detected-protocols
Use the clear spanning-tree detected-protocols Privileged EXEC command
to restart the protocol migration process (force the renegotiation with
neighboring switches) on all interfaces or on the specified interface
Syntax
clear spanning-tree detected-protocols [interface interface-id]
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Command Mode
Privileged EXEC mode
User Guidelines
This feature should be used only when working in RSTP or MSTP mode.
Example
console# clear spanning-tree detected-protocols
spanning-tree mst priority
Use the spanning-tree mst priority Global Configuration mode command to
configure the device priority for the specified spanning-tree instance. Use the
no form of this command to restore the default configuration.