Dell PowerConnect PC5524 User Manual

266 Syslog Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Syslog.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Example
The following example enables logging error messages.
Console(config)# logging on
Logging host
Use the logging host global configuration command to log messages to a
syslog server. Use the no form of this command to delete the syslog server
with the specified address from the list of syslogs.
Syntax
logging host {ipv4-address | ipv6-address | hostname} [port port] [severity
level] [facility facility] [description text]
no logging host {ipv4-address | ipv6-address | hostname}
Parameters
• ipv4-address —IPv4 address of the host to be used as a syslog server.
•
ipv6-address —Pv6 address of the host to be used as a syslog server. When
the IPv6 address is a Link Local address (IPv6Z address), the outgoing
interface name must be specified. Refer to the User Guidelines for the
interface name syntax.
•
hostname —Hostname of the host to be used as a syslog server. Only
translation to IPv4 addresses is supported. (Range: 1–158 characters.
Maximum label size: 63)
•
port —Port number for syslog messages. If unspecified, the port number
defaults to 514. (Range: 1–65535)
•
level —Limits the logging of messages to the syslog servers to a specified
level: emergencies, alerts, critical, errors, warnings, notifications,
informational, debugging.
•
facility —The facility that is indicated in the message. It can be one of the
following values: local0, local1 , local2 , local3 , local4 , local5 , local 6,
local7. If unspecified, the port number defaults to local7.
• text—Description of the syslog server. (Range: Up to 64 characters)

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English