270 Syslog Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Syslog.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
logging file
Use the logging file Global Configuration mode command to limit syslog
messages sent to the logging file to messages with a specific severity level. Use
the no form of this command to cancel using the buffer.
Syntax
logging file
level
no logging file
Parameters
level—Specifies the severity level of syslog messages sent to the logging file.
The possible values are: emergencies, alerts, critical, errors, warnings,
notifications, informational and debugging.
Default Configuration
The default severity level is errors.
Command Mode
Global Configuration mode
Example
The following example limits syslog messages sent to the logging file to
messages with severity level alerts.
Console(config)#
logging file alerts
clear logging file
Use the clear logging file Privileged EXEC mode command to clear messages
from the logging file.
Syntax
clear logging file
To Next Page
Loading...
Need help?
General