Dell PowerConnect PC5524 - Negotiation

332 Ethernet Configuration Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Ethernet.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Syntax
duplex {half | full}
no duplex
Parameters
• half —Forces half-duplex operation.
•
full —Forces full-duplex operation.
Default Configuration
The interface operates in full duplex mode.
Command Mode
Interface Configuration (Port-channel) mode
Example
The following example configures gigabitethernet port 1/0/ 5 to operate in
full duplex mode.
Console(config)# interface gigabitethernet 1/0/5
Console(config-if)# duplex full
Console(config-if)#
negotiation
Use the negotiation Interface Configuration (Ethernet, Port-channel) mode
command to enable auto-negotiation operation for the speed and duplex
parameters
and master-slave mode of a given interface, where the preferred
default mode is master mode
. Use the no form of this command to disable
auto-negotiation.
Syntax
negotiation [ capability [ capability2 ... capability5 ]] [preferred {master | slave}]
no negotiation