Dell PowerConnect PC5524 User Manual

Syslog Commands 267
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Syslog.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Default
No messages are logged to a syslog server host.
Command Mode
Global Configuration mode
User Guidelines
You can use multiple syslog servers.
The format of an IPv6Z address is: <
ipv6-link-local-address>%<interface-
name
>
interface-name =
vlan<integer> | ch<integer> | isatap<integer> |
<physical-port-name> | 0
integer = < decimal-number> | <integer><decimal-number >
decimal-number = 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9
physical-port-name = Designated port number, for example 1/0/16.
If the egress interface is not specified, the default interface is selected.
Specifying interface zone=0 is equal to not defining an egress interface.
Examples
console(config)# logging host 1.1.1.121
console(config)# logging host 3000::100
logging console
Use the logging console Global Configuration mode command to limit
messages logged to the console to messages with a specific severity level. Use
the no form of this command to disable logging limiting to the console.
Syntax
logging console level
no logging console

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English