Dell PowerConnect PC5524 User Manual

Address Table Commands 411
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Address_Table.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Addresses
gi1/0/ 3 Enabled Lock Discard, 8 Disabled -
Shutdown
The following table describes the fields shown above.
show ports security addresses
Use the show ports security addresses Privileged EXEC mode command to
display the current dynamic addresses in locked ports.
Syntax
show ports security addresses [ interface-id
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Command Mode
Privileged EXEC mode
Field Description
Port The port number.
Status The port security status. The possible values are: Enabled or
Disabled.
Mode The port security mode.
Action The action taken on violation.
Maximum The maximum number of addresses that can be associated on
this port in the Max-Addresses mode.
Trap The status of SNMP traps. The possible values are: Enable or
Disable.
Frequency The minimum time interval between consecutive traps.

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English