Dell PowerConnect PC5524 User Manual

Ethernet Configuration Commands 339
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Ethernet.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
set interface active
Use the set interface active EXEC mode command to reactivate an interface
that was shut down.
Syntax
set interface active { interface-id }
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Command Mode
EXEC mode
User Guidelines
This command is used to activate interfaces that were configured to be active,
but were shut down by the system.
Example
The following example reactivates gigabitethernet port 1/0/ 1.
Console# set interface active gigabitethernet 1/0/1
show interfaces configuration
Use the show interfaces configuration EXEC mode command to display the
configuration for all configured interfaces or for a specific interface.
Syntax
show interfaces configuration [interface-id ]
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English