420 sFlow Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\750_sFlow.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
User Guidelines
If no interface is specified by the user, the command clears all the sFlow
statistics counters (including datagrams sent). If an interface is specified by
the user, the command clears only the counter of the specific interface.
show sflow configuration
Use the show sflow configuration EXEC mode command to display the
sFlow configuration for ports that are enabled for Flow sampling or Counters
sampling.
Syntax
show sflow configuration
[interface-id]
Parameters
interface-id—Specifies an interface ID. The interface ID must be an
Ethernet port.
Command Mode
EXEC mode
Example
Console #
show sflow configuration
Receivers
Index IP Address Port Max Datagram Size
----- -------------------- -------- ----------------
1 0.0.0.0 6343 1400
2 172.16.1.2 6343 1400
3 0.0.0.0 6343 1400
4 0.0.0.0 6343 1400
5 0.0.0.0 6343 1400
6 0.0.0.0 6343 1400
7 0.0.0.0 6343 1400
8 0.0.0.0 6343 1400
Interfaces
To Next Page
Loading...
Need help?
General