Dell PowerConnect PC5524 User Manual

DHCP Server Commands 667
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\DCHP_Server.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
netbios-node-type
Use the netbios-node-type DHCP Pool Configuration mode command to
configure the NetBIOS node type for Microsoft Dynamic Host Configuration
Protocol (DHCP) clients. Use the no form of this command to remove the
NetBIOS node type.
Syntax
netbios-node-type {b-node | p-node | m-node | h-node }
no netbios-node-type
Parameters
• b-node —Specifies the Broadcast NetBIOS node type.
•
p-node —Specifies the Peer-to-peer NetBIOS node type.
•
m-node —Specifies the Mixed NetBIOS node type.
•
h-node —Specifies the Hybrid NetBIOS node type.
Command Mode
DHCP Pool Host Configuration mode
DHCP Pool Network Configuration mode
Default Configuration
No bios node type is defined.
Example
The following example specifies the client's NetBIOS type as hybrid.
Console(config-dhcp)# netbios node-type h-node
next-server
Use the next-server DHCP Pool Configuration mode command to configure
the next server in the boot process of a Dynamic Host Configuration Protocol
(DHCP) client. Use the no form of this command to remove the boot server.

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English