Dell PowerConnect PC5524 User Manual

738 Quality of Service (QoS) Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\QoS.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
the no form of this command to remove an existing aggregate policer from a
policy map.
Syntax
police aggregate aggregate-policer-name
no police aggregate aggregate-policer-name
Parameters
aggregate-policer-name—Specifies the aggregate policer name.
Command Mode
Policy-map Class Configuration mode
User Guidelines
An aggregate policer can be applied to multiple classes in the same policy
map. An aggregate policer cannot be applied across multiple policy maps or
interfaces.
Use the exit command to return to the Policy-map Configuration mode. Use
the end command to return to the Privileged EXEC mode.
Example
The following example applies the aggregate policer called Policer1 to a class
called Class1 in a policy map called Policy1.
Console(config)# policy-map policy1
Console(config-pmap)#
class class1
Console(config-pmap-c)#
police aggregate policer1
wrr-queue cos-map
Use the wrr-queue cos-map Global Configuration mode command maps
Class of Service (CoS) values to a specific egress queue. Use the no form of
this command to restore the default configuration.
Syntax
wrr-queue cos-map queue-id cos0 ... cos7

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English