Dell PowerConnect PC5524 User Manual

Management ACL Commands 153
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Management_ACL.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Parameters
• interface-id:—Specify an interface ID. The interface ID can be one of the
following types: Ethernet port, Port-channel or VLAN
•
service service — Specifies the service type. Possible values are: Telnet,
SSH, HTTP, HTTPS and SNMP.
•
ipv4-address — Specifies the source IPv4 address.
•
ipv6-address/ipv6-prefix-length — Specifies the source IPv6 address and
source IPv6 address prefix length. The prefix length must be preceded by a
forward slash (/). The parameter is optional.
•
mask mask — Specifies the source IPv4 address network mask. This
parameter is relevant only to IPv4 addresses.
•
mask prefix-length — Specifies the number of bits that comprise the
source IPv4 address prefix. The prefix length must be preceded by a
forward slash (/). This parameter is relevant only to IPv4 addresses. (Range:
0–32)
Command Mode
Management Access-List Configuration mode
User Guidelines
Rules with ethernet, VLAN, and port-channel parameters are valid only if an
IP address is defined on the appropriate interface.
Example
The following example permits all ports in the access list called mlist
Console(config)# management access-list mlist
Console(config-macl)#
permit
deny (Management)
The deny Management Access-List Configuration mode command sets
conditions for the management access list.

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English