Dell PowerConnect PC5524 User Manual

750 Quality of Service (QoS) Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\QoS.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Parameters
• dscp- list —Specifies up to 8 DSCP values, separated by spaces. (Range:
0–63)
•
dscp-mark-down —Specifies the DSCP value to mark down. (Range: 0–63)
Default Configuration
The default map is the Null map, which means that each incoming DSCP
value is mapped to the same DSCP value.
Command Mode
Global Configuration mode.
Example
The following example marks incoming DSCP value 3 as DSCP value 43 on
the policed-DSCP map.
Console(config)# qos map policed-dscp 3 to 43
Reserved DSCP. DSCP 3 was not configured.
qos map dscp-queue
Use the qos map dscp-queue Global Configuration mode command to
configure the DSCP to CoS map. Use the no form of this command to restore
the default configuration.
Syntax
qos map dscp-queue dscp-list to queue-id
no qos map dscp-queue [ dscp-list ]
Parameters
• dscp-list —Specifies up to 8 DSCP values, separated by spaces. (Range: 0–
63)
•
queue-id —Specifies the queue number to which the DSCP values are
mapped.

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English