228 AAA Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\AAA.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Default Configuration
The full service password recovery is enabled by default.
Command Mode
Gobal Configuration mode
User Guidelines
This mechanism allows an end user, with physical access to the console port
of the device, to enter the boot menu and trigger the password recovery
process. The following functionality occurs:
• If password recovery is enabled, the user can access the boot menu and
trigger the password recovery in the boot menu. All configuration files and
user files are kept.
• If password recovery is disabled, the user still can access the boot menu
and trigger the password recovery in the boot menu. However, the
configuration files and user files are removed, and the following log
message is generated to the terminal: “All the configuration and user files
were removed”
Example
The following command disables password recovery:
console
# no service password recovery
Note that choosing to use Password recovery option in the
Boot Menu during the boot process will remove the
configuration files and the user files. Would you like to
continue ? Y/N.
enable password
Use the enable password Global Configuration mode command to set a local
password to control access to normal and privilege levels. Use the no form of
this command to return to the default password.
To Next Page
Loading...
Need help?
General