Dell PowerConnect PC5524 User Manual

802.1x Commands 315
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\802.1X.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Default Configuration
Protect
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
The command is relevant for single-host mode.
The command is not relevant for multiple-hosts mode.
The command is relevant for multiple-sessions mode, but you should note
that since PCs are sending traffic prior to successful 802.1X authentication,
this command might not be useful in this mode.
BPDU message whose MAC address is not the supplicant MAC address
wouldn’t be discarded in the protect mode.
BPDU message whose MAC address is not the supplicant MAC address
would cause a shutdown in the shutdown mode.
Example
console(config)# interface gigabitethernet gi1/0/1
console(config-if)#
dot1x violation-mode protect
dot1x guest-vlan
Use the dot1x guest-vlan Interface Configuration (VLAN) mode command to
define a guest VLAN. Use the no form of this command to restore the default
configuration.
Syntax
dot1x guest-vlan
no dot1x guest-vlan
Default Configuration
No VLAN is defined as a guest VLAN.

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English