254 RADIUS Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Radius.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
radius-server source-ipv6
Use the radius-server source-ipv6 Global Configuration mode command to
specify the source IPv6 address used for communication with RADIUS
servers. Use the no form of this command to restore the default
configuration.
Syntax
radius-server source-ipv6 {
source
}
no radius-server source-ipv6 {
source
}
Parameters
source—Specifies the source IPv6 address.
Default Configuration
The source IP address is the IP address of the outgoing IP interface.
Command Mode
Global Configuration mode
User Guidelines
If there is no available IP interface of the configured IP source address, an
error message is issued when attempting to communicate with the IP address.
Example
The following example configures the source IP address used for
communication with all RADIUS servers to
3ffe:1900:4545:3:200:f8ff:fe21:67cf.
console(config)#
radius-server source-ipv6
3ffe:1900:4545:3:200:f8ff:fe21:67cf
To Next Page
Loading...
Need help?
General