Dell PowerConnect PC5524 User Manual

312 802.1x Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\802.1X.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Syntax
clear dot1x statistics [ interface-id ]
Parameters
interface-id—Specify an Ethernet port ID..
Default Configuration
Statistics on all ports are cleared.
Command Mode
Privileged EXEC mode
Example
The following example displays how to clear 802.1x statistics on all ports
Console# clear dot1x statistics
dot1x auth-not-req
Use the dot1x auth-not-req Interface Configuration (VLAN) mode command
to enable unauthorized devices access to the VLAN. Use the no form of this
command to disable access to the VLAN.
Syntax
dot1x auth-not-req
no dot1x auth-not-req
Default Configuration
Access is enabled.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
An access port cannot be a member in an unauthenticated VLAN.
The native VLAN of a trunk port cannot be an unauthenticated VLAN.

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English