DHCP Server Commands 683
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\DCHP_Server.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
DHCP server enabled
The number of used (all types) entries is 5
The number of pre-allocated entries is 1
The number of allocated entries is 1
The number of expired entries is 1
The number of declined entries is 2
IP address Hardware Address Lease Expiration Type State
---------- ---------------- --------------- ------- ---------
1.16.3.24 02c7.f802.0422 dynamic declined
The following table describes the significant fields shown in the display.
show ip dhcp server statistics
Use the show ip dhcp server statistics EXEC command to display Dynamic
Host Configuration Protocol (DHCP) Server statistics.
Syntax
show ip dhcp server statistics
Command Mode
EXEC mode
Field Description
IP address The host IP address as recorded on the DHCP Server.
Hardware
address
The MAC address or client identifier of the host as recorded
on the DHCP Server.
Lease expiration The lease expiration date of the host IP address.
Type The manner in which the IP address was assigned to the
host.
State The IP Address state.
To Next Page
Loading...
Need help?
General