Dell PowerConnect PC5524 User Manual

Address Table Commands 393
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Address_Table.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
• ethernet interface-list —Specifies a list of Ethernet ports. Separate
nonconsecutive Ethernet ports with a comma and no spaces. Use a hyphen
to designate a range of ports.
•
port-channel port-channel-list —Specifies a list of port channels. Separate
nonconsecutive port-channels with a comma and no spaces; use a hyphen
to designate a range of port channels.
Default Configuration
Ports are not forbidden to dynamically join multicast groups.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
Use this command to forbid a port to dynamically join (by IGMP, for
example) a multicast group.
The port can still be a multicast router port.
Example
The following example forbids forwarding of all multicast packets to gi1/0/1
within VLAN 2.
Console(config)# interface vlan 2
Console(config-if)#
bridge multicast forbidden forward-all add
ethernet
gi1/0/1
mac address-table static
Use the mac address-table static Global Configuration mode command to
add MAC-layer station source address to the MAC address table. Use the no
form of this command to delete the MAC address.
Syntax
mac address-table static mac-address vlan vlan-id interface interface-id
[permanent | delete-on-reset | delete-on-timeout | secure ]
no mac address-table static [ mac-address] vlan vlan-id

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English