Dell PowerConnect PC5524 User Manual

640 IPv6 Addressing Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\IPv6_Addressing.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Example
The following example configures MLD reporting for specific groups:
ipv6 mld join-group ff02::10
show ipv6 neighbors
Use the show ipv6 neighbors Privileged EXEC mode command to display
IPv6 neighbor discovery cache information.
Syntax
show ipv6 neighbors {static | dynamic}[ipv6-address ipv6-address] [mac-
address mac-address] [interface-id]
Parameters
• static —Shows static neighbor discovery cash entries.
•
dynamic —Shows dynamic neighbor discovery cash entries.
•
ipv6-address —Shows the neighbor discovery cache information entry of a
specific IPv6 address.
•
mac-address —Shows the neighbor discovery cache information entry of a
specific MAC address.
•
interface-id —Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port, Port-channel or VLAN.
Command Mode
Privileged EXEC mode
User Guidelines
Since the associated interface of a MAC address can be aged out from the
FDB table, the Interface field can be empty.
When an ARP entry is associated with an IP interface that is defined on a
port or port-channel, the VLAN field is empty.
The possible neighbor cash states are:

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English