Dell PowerConnect PC5524 User Manual

Line Commands 215
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Line.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
no autobaud
Default Configuration
Automatic baud rate detection is disabled.
Command Mode
Line Configuration mode
User Guidelines
To start communication using Autobaud, press the Enter key twice.
Example
The following example enables autobaud.
Console(config)# line console
Console(config-line)# autobaud
exec-timeout
The exec-timeout Line Configuration mode command sets the session idle
time interval, during which the system waits for user input before automatic
logoff. Use the no form of this command to restore the default configuration.
Syntax
exec-timeout minutes [ seconds ]
no exec-timeout
Parameters
• minutes —Specifies the number of minutes. (Range: 0-65535)
•
seconds —Specifies the number of seconds. (Range: 0-59)
Default Configuration
The default idle time interval is 10 minutes.
Command Mode
Line Configuration mode

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English