Dell PowerConnect PC5524 User Manual

RADIUS Commands 251
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Radius.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
If retransmit is not specified, the global value is used.
If key-string is not specified, the global value is used.
If the source value is not specified, the global value is used.
The default usage type is all.
Command Mode
Global Configuration mode
User Guidelines
To specify multiple hosts, multiple radius-server host commands can be used.
If no host-specific timeout, retries, deadtime or key-string values are
specified, the global values apply to each RADIUS server host.
The source parameter address type must be the same as that of the host
parameter.
Example
The following example specifies a RADIUS server host with IP address
192.168.10.1, authentication request port number 20, and a 20-second
timeout period.
Console(config)# radius-server host 192.168.10.1 auth-port 20
timeout 20
radius-server key
Use the radius-server key Global Configuration mode command to set the
authentication and encryption key for all RADIUS communications between
the device and the RADIUS daemon. Use the no form of this command to
restore the default configuration.
Syntax
radius-server key [ key-string ]
no radius-server key

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English