324 802.1x Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\802.1X.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Example
The following example displays 802.1x advanced features for the device.
dot1x system-auth-control monitor
Use the dot1x system-auth-control monitor Global Configuration command
to enable 802.1x globally the 802.1x Monitoring mode and define the
Monitor VLAN. Use the no format of the command to return to default.
Syntax
dot1x system-auth-control monitor
[vlan vlan-id]
no dot1x system-auth-control monitor
console# show dot1x advanced
Guest VLAN: 3978
Unauthenticated VLANs: 91, 92
Interface Multiple Guest MAC VLAN Legacy- Policy
Hosts VLAN Authentication Assignment supp
Mode Assignment
------------------ ---------------------- ----------- --------- ------
gi1/0/1 Disabled Enabled MAC-and-802.1X Enabled Enable Disabled
gi1/0/2 Enabled Disabled Disabled Enabled Enable Disabled
Switch# show dot1x advanced gigabitethernet 1/0/1
Interface Multiple Guest MAC VLAN Legacy- Policy
Hosts VLAN Authentication Assignment sup Mode Assignment
------------------ ----------------------- ----------- ------ -------
gi1/0/1 Disabled Enabled MAC-and-802.1X Enabled Enable
Legacy-Supp mode is disabled
Policy assignment resource err handling: Accept
Single host parameters
Violation action: Discard
Trap: Enabledx
Status: Single-host locked
Violations since last trap: 9
To Next Page
Loading...
Need help?
General