Dell PowerConnect PC5524 User Manual

Power over Ethernet (PoE) Commands 357
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\PoE.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
22
Power over Ethernet (PoE)
Commands
power inline
Use the power inline Interface Configuration mode command to configure
the inline power administrative mode on an interface.
Syntax
power inline {auto | never}
Parameters
• auto —Turns on the device discovery protocol and applies power to the
device.
•
never —Turns off the device discovery protocol and stops supplying power
to the device.
Default Configuration
The default configuration is set to auto.
Command Mode
Interface Configuration (Ethernet) mode
Example
The following example turns on the device discovery protocol on port 4.
Console(config)# interface gigabitethernet 1/0/4
Console(config-if)# power inline auto

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English