Dell PowerConnect PC5524 User Manual

LLDP Commands 443
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\LLDP.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
show lldp local tlvs-overloading
Use the show lldp local tlvs-overloading EXEC mode command to display
the status of TLVs overloading of the Link Layer Discovery Protocol (LLDP).
Syntax
show lldp local tlvs-overloading [interface-id]
Parameters
interface-id—Specifies an interface ID. The interface ID must be an
Ethernet port.
Command Mode
EXEC mode
User Guidelines
The command calculates the overloading status of the current LLDP
configuration, and not for the last LLDP packet that was sent.
Example
Switch# show lldp local tlvs-overloading
Ports with LLDP TLV overloading are: gi1/0/1, gi1/0/9
Switch# show lldp local tlvs-overloading
No LLDP TLV overloading.
Switch# show lldp local tlvs-overloading gi1/0/1
TLVs Group Bytes Status
------------ ------ --------------
Mandatory 31 Transmitted
LLDP-MED Capabilities 9 Transmitted
LLDP-MED Location 200 Transmitted
802.1 1360 Overloading
Total: 1600 bytes
Left: 100 bytes

Dell PowerConnect PC5524 Specifications

General

Brand	Dell
Model	PowerConnect PC5524
Category	Switch
Language	English