Remove the clutch outer (page 12-12).
Check the clutch shoes [1] for abnormal wear.
Measure the thickness of each shoe.
SERVICE LIMIT: 2.0 mm (0.08 in)
Replace the clutch shoes if they are less than the
service limit (page 12-12).
Install the clutch outer (page 12-20).
Support the scooter with its centerstand.
Check the sidestand spring
[1]
for damage or loss of
tension.
Check the sidestand [2] assembly for freedom of
movement
and
lubricate the sidestand pivot if
necessary.
Check the sidestand switch system:
1.
Retract the sidestand.
2.
Start the engine.
3.
Move the sidestand full down.
4.
The engine should stop
as
the sidestand
is
lowered.
If there
is
a problem with the system, check the
sidestand switch (page 6-13).
FRONT
Loose, worn
or
Check the action of the forks by operating the front
damaged
brake and compressing the front suspension several
suspension parts
times.
impair scooter
Check the entire assembly for signs of leaks, damage,
stability and control.
or loose fasteners.
Replace damaged components which cannot
be
repaired.
Tighten all nuts
and
bolts.
For fork service (page 17-8).
REAR
Check the action of the shock absorber by compressing
it several times.
Check the entire shock absorber ·assembly for signs of
leaks, damage or loose fasteners.
Replace damaged components which cannot
be
repaired.
Tighten all nuts
and
bolts.
For rear shock absorber service (page 18-12).
Support the scooter securely and raise the rear wheel
off the ground.
Check for worn engine mounting bushings
by
grabbing
the engine
and
attempting to move the engine side
to
side.
For engine bushing service (page 16-6).
MAINTENANCE
[1]
To Next Page
Loading...
Need help?
General
