HP 530 User Manual

5-32
General System Configuration
Configuring SNMP
Web: Configuring SNMP v1 and v2c Traps
The SNMP – Traps and SNMP – Trap Hosts screens configure SNMP v1 and
v2c trap notifications that can be sent to specified management stations.
SNMP Traps
The SNMP – Traps screen controls whether specific SNMP notifications are
sent:
■ System Traps: pertaining to the system.
• hpWlanSystemUp – This notification is sent when the access point
is fully up and running.
• hpWlanSystemDown – This notification is sent before the access
point is about to reboot.
• hpWlanMgmtAccessUpdate – This notification is sent when system
management access is set to Enable/Disable.
• hpWlanButtonUpdate – This notification is sent when the RESET
and CLEAR button functions are set to Enable/Disable.
• hpWlanSystemFWUpgradeStatus – This trap contains information
about the current status of firmware upgrade. The IP address is the
file server's IP address.
• hpWlanSystemConfigFileTransfer – This trap contains informa-
tion about the file name, server address and direction of configuration
file. The IP address is the file server's IP address.
■ AP Traps: pertaining to the access point.
• hpWlanApInterfaceUpdate - This notification is sent out when the
Ethernet or 802.11 wireless (radio) interface is enabled or disabled.
• hpWlanApSSIDUpdate – This notification is sent out when an SSID
is enabled or disabled.
• hpWlanClientAssociation– This notification is sent when a station
successfully associates with the access point. The notification value
includes the MAC address of the associated station.
• hpWlanClientReAssociation – This notification is sent when a
station successfully re-associates with the access point. The notifica-
tion value includes the MAC address of the re-associated station.
• hpWlanClientAuthentication – This notification is sent when a
station successfully authenticates with the access point. The notifica-
tion value includes the MAC address of the authenticated station.
• hpWlanClientDeauthentication – This notification is sent when a
station successfully authenticates with the access point. The notifica-
tion value includes the MAC address of the authenticated station.

HP 530 Specifications

General

Brand	HP
Model	530
Category	Laptop
Language	English