HP 530 User Manual

9-80
Command Line Reference
Web Authentication Commands
web-auth (Global Address Pool)
These commands enable configure the temporary pool of IP addresses used
by Web-Auth on the device. The no version of a command clears the field value.
Syntax
[no] web-auth starting-ip-address <ip-address> <subnet-mask>
[no] web-auth lease-time <lease>
• ip-address - Specifies the starting IP address of the Web-Auth tempo-
rary address pool.
• subnet-mask - Specifies the subnet mask of the Web-Auth temporary
address pool.
• lease - Specifies the lease, in seconds, granted to Web-Auth temporary
addresses.
Command Mode
Global Configuration
[no] web-auth default-login-page Enables or disables the default
field values for the Login screen.
IC-R-
WLAN
9-83
web-auth custom-login-text [title <
title-
text>] | [header <header-text>] | [footer
<
footer-text>] | [descriptive
<
descriptive-text>]
Specifies the custom text field
values on the Web-Auth Login
screen.
IC-R-
WLAN
9-83
[no] web-auth default-welcome-page Enables or disables the default
field values for the Welcome
screen.
IC-R-
WLAN
9-83
web-auth custom-welcome-text [title
<
title-text>] | [header <header-text>] |
[footer <
footer-text>] | [descriptive
<
descriptive-text>]
Specifies the custom text field
values on the Web-Auth
Welcome screen.
IC-R-
WLAN
9-83
[no] web-auth default-failed-page Enables or disables the default
field value values for the Failed
screen.
IC-R-
WLAN
9-83
web-auth custom-failed-text [title <title-
text
>] | [header <header-text>] | [footer
<
footer-text>] | [descriptive
<
descriptive-text>]
Specifies the custom text fields
on the Web-Auth Failed screen.
IC-R-
WLAN
9-83
Command Function Mode Page

HP 530 Specifications

General

Brand	HP
Model	530
Category	Laptop
Language	English