HP 530 User Manual

9-101
Command Line Reference
Wireless Interface Commands
Wireless Interface Commands
The commands described in this section configure global parameters for the
wireless interface.
Command Function Mode Page
radio < 1 | 2 > Enters wireless interface configuration mode. GC 9-102
ssid <ssid> Sets SSID string. IC-R 9-103
description Specifies a human-readable description of this
interface.
IC-R 9-104
closed-system Closes access to stations without a pre-
configured SSID.
IC-R-
WLAN
9-104
mode<value> Sets the radio working mode. IC-R 9-105
antenna < external |
internal >
Sets the antenna on this radio. IC-R 9-106
antenna mode< diversity |
single >
Sets the antenna mode. IC-R 9-106
basic-rate<value> Configures the maximum data rate at which the
access point can transmit traffic.
IC-R 9-107
supported-rate<value> Configures the maximum data rate at which the
access point can transmit traffic.
IC-R 9-108
channel-policy < static |
auto >
Sets the policy on the channel to static or
automatic.
IC-R 9-108
beacon-interval <interval> Configures the rate at which beacon frames
are transmitted from the access point.
IC-R 9-109
dtim-period Configures the rate at which stations in sleep
mode must wake up to receive broadcast/
multicast transmissions
IC-R 9-110
max-stations Configures the maximum number of stations
that can be associated with the access point
at the same time
IC-R 9-111
preamble Sets the length of signal preamble. IC-R 9-111
[no] protected-mode Sets the 802.11 b/g CTS protection mode for this
radio.
IC-R 9-112

HP 530 Specifications

General

Graphics	Intel GMA 950
Processor	Intel Core Duo T2050
RAM	512 MB, upgradable to 2 GB
Storage	80 GB HDD
Display	15.4-inch WXGA (1280 x 800)
Operating System	Windows XP Professional
Battery	6-cell Lithium-Ion
Optical Drive	DVD+/-RW
Ports	3 x USB 2.0, 1 x VGA, 1 x RJ-45, 1 x RJ-11, 1 x Headphone, 1 x Microphone
Wireless	802.11a/b/g