9-65
Command Line Reference
RADIUS Accounting/Authentication
RADIUS Accounting/Authentication
The access point provides configuration for RADIUS Accounting servers and
Radius Authentication which can be used to provide valuable information on
user activity in the network.
radius-accounting
This command enables RADIUS Accounting for the SSID on the access point.
Use the no form to disable RADIUS Accounting. To validate these settings, use
the show wlan <index> command, see
page 118.
Syntax
radius-accountin
g <primary | secondary> <ip
<ip> | port <port> | key <key>>no radius-accounting
• primary - Configure settings (IP, port, key) for the primary RADIUS
accounting server. The no version of the command disables use of the
primary RADIUS accounting server by clearing the IP address setting.
• secondary - Configure settings (IP, port, key) for the secondary
RADIUS accounting server. The no version of the command disables
use of the secondary RADIUS accounting server by clearing the IP
address setting.
• ip <ip> - The IP address of the RADIUS server.
• port <port> - The port of the RADIUS server.
• key <key> - The shared secret string for the RADIUS server.
Command Function Mode Page
[no] radius-accounting <primary |
secondary> <ip <ip> | port <port> | key
<key>>
Enables RADIUS Accounting. IC-R-
WLAN
9-65
[no] radius <failover-to local |
retransmit >
Establishes RADIUS failover and
retransmit parameters for this
WLAN.
IC-R-
WLAN
9-66
[no] radius <<primary | secondary> <ip
<ip> | local | mac-auth-password
<password> | mac-format <multi-colon
| multi-dash | no-delimiter | single-
dash> | port <port> | key <key>>
Configures RADIUS parameters. IC-R-
WLAN
9-66
To Next Page
Loading...
Need help?
General
