HP 530 User Manual

9-137
Command Line Reference
Neighbor AP Detection Commands
Neighbor AP Detection Commands
The access point can be configured to periodically scan all radio channels and
find other access points within range. Alternatively, the access point can scan
continuously in a dedicated mode with no stations supported. A database of
nearby access points is maintained where detected APs can be identified.
ap-detection
This command enables the background detection of nearby access points. The
no command disables AP detection by this radio.
Syntax
ap-detection [dedicated]
no ap-detection
• [dedicated] - Dedicate this radio to be used for continuous AP detec-
tion. This radio will not be able to service wireless stations or WDS
links if it is dedicated to AP-detection. The no version of this
command is not available for this parameter.
Default Setting
Disabled
Command Function Mode Page
[no] ap-detection
[dedicated]
Enables the periodic or dedicated detection of
nearby access points
IC-R 9-137
ap-detection
duration <value>
Sets the duration of the passive detection of
nearby access points
IC-R 9-138
ap-detection expire-
time <value>
Sets the time a dedicated AP remains on the AP
list after its last received beacon.
IC-R 9-138
ap-detection interval
<value>
Sets the wait time between scans when
performing periodic (passive) scanning.
IC-R 9-139
ap-detection max-
entries <value>
Sets the maximum amount of entries of the
detected APs on the detected AP list.
IC-R 9-139
show detected-ap Shows the current configuration for AP
detection
MC 9-140

HP 530 Specifications

General

Brand	HP
Model	530
Category	Laptop
Language	English