To Next Page

To Previous Page

7-24

Wireless Security Configuration

Manual Configuration Using the CLI

The following sections show examples of how to use the CLI to view and

configure access point security settings.

NOTE: Security settings using the CLI can only be made for WLANs in the context of

Radio 1. Security settings for each different WLAN are automatically copied

from Radio 1 to Radio 2. The only setting that can be made specifically in the

context of Radio 2 is to enable or disable the entire WLAN on Radio 2.

CLI: Configuring Security Settings

CLI Commands Used in This Section

Command Syntax CLI Reference

Page

security <no-security | static-wep | dynamic-wep | wpa-psk | wpa-802.1x> 9-126

wep-default-key

<1| 2| 3| 4> 9-128

[no] wep-key ascii 9-129

wep-key-length <64|128> 9-130

wep-key-<1| 2| 3| 4> <string> 9-130

[no] open-system-authentication 9-131

[no] shared-key authentication 9-132

radius-accounting <primary | secondary> ip <ip> | port <port> | key <key> 9-65

radius <primary | secondary> 9-67

[no] wpa-allowed 9-132

[no] wpa2-allowed 9-132

wpa-pre-shared-key <key> 9-133

wpa-cipher-tkip 9-134

wpa-cipher-aes 9-134

rsn-preauthentication 9-136

HP 530 User Manual

Other manuals for HP 530