HP 530 User Manual

A-14
File Uploads, Downloads, and Resets
Rebooting the Access Point
Rebooting the Access Point
Using the Web user interface and CLI described in this section, you can reboot
the access point, which cycles the system back to the last saved configuration.
Web: Rebooting the System
The Reboot tab on the System Maintenance screen enables the access point
to reboot to the last saved configuration file.
The Web interface enables you to perform this action:
■ [Reboot]: Submits a request to reboot the access point. A system confir-
mation message appears and provides opportunity to cancel.
NOTE During a reboot, connection to the AP is lost and the browser will not stay on
the System Maintenance screen while the reboot takes place. Test the connec-
tion to find out when the process has completed.
Figure A-3. Reboot Tab
To Reboot the Access Point:
1. Select Management> System Maintenance > Reboot tab.
2. To initiate the reboot process, click [Reboot].

HP 530 Specifications

General

Graphics	Intel GMA 950
Processor	Intel Core Duo T2050
RAM	512 MB, upgradable to 2 GB
Storage	80 GB HDD
Display	15.4-inch WXGA (1280 x 800)
Operating System	Windows XP Professional
Battery	6-cell Lithium-Ion
Optical Drive	DVD+/-RW
Ports	3 x USB 2.0, 1 x VGA, 1 x RJ-45, 1 x RJ-11, 1 x Headphone, 1 x Microphone
Wireless	802.11a/b/g