To Next Page

To Previous Page

7-45

Wireless Security Configuration

Configuring MAC Address Authentication

Web: Configuring Access Control List

The Local MAC Authentication tab shown in Figure 7-9 enables you to create

and maintain access control lists (ACLs) that can be directly applied to each

WLAN for access control.

You can modify these parameters:

■ Access Control List: Selects among preconfigured ACLs.

■ [Remove]: Updates the WLAN (BSS/SSID) interface by removing (prohib-

iting) the selected MAC configuration.

■ MAC Address [Add]: Adds the entered MAC address to selected ACL list.

■ List Name: Specifies a new list name.

■ MAC Entry: Specifies the MAC address for the list.

■ New ACL [Add]: Adds the New ACL to the list of Access Control Lists.

■

Figure 7-9. Configuring an Access Control List

To Configure the Access Control List:

1. Select Management> Local MAC Authentication tab.

2. Enter the ACL name in the List Name field.

3. Enter the MAC address in the MAC Entry field.

4. Click [Add] and the new list appears in the ACL List drop-down.

HP 530 User Manual

Other manuals for HP 530