HP 530 User Manual

9-125
Command Line Reference
Wireless Security Commands
Wireless Security Commands
The commands described in this section configure parameters for wireless
security on SSID interfaces.
Command Function Mode Page
security <no-security | static-
wep | dynamic wep | wpa-psk |
wpa-8021x>
Enables the type of security suite on a
SSID interface.
IC-W-S 9-126
wep-default-key <1| 2| 3| 4> Defines the key index if using the
static-wep security.
IC-W-S 9-128
[no] wep-key
ascii Sets the wep key to an ascii format. IC-W-S 9-129
wep-key-length <64|128> Sets the wep-key-length to either 64 or
128 bits if using the static-wep
security.
IC-W-S 9-130
wep-key-<1| 2| 3| 4> <key> Defines the up to four security keys, if
using the static-wep security.
IC-W-S 9-130
[no] open-system-
authentication
Enables or disables open-system
authentication for SSID association.
IC-W-S 9-131
[no] shared-key authentication Enables or disables shared-key
authentication for SSID association.
IC-W-S 9-132
[no] wpa-allowed | [no]
wpa2-
allowed
Enables or disables wireless stations
to use the original WPA and WPA2 on
this WLAN.
IC-W-S 9-132
wpa-preshared-key <key> Defines a WPA preshared key. IC-W-S 9-133
wpa-cipher-tkip Enables TKIP for WPA on this WLAN. IC-W-S 9-134
wpa-cipher-aes Enables the Advanced Encryption
Algorithm (AES) for WPA on this
WLAN.
IC-W-S 9-134
wpa-psk-ascii Enables ASCII shared key. IC-W-S 9-134
wpa-psk-hex Enables hex shared key. IC-W-S 9-134
rsn-preauthentication Enables WPA2 stations to pre-
authenticate on this WLAN.
IC-W-S 9-136

HP 530 Specifications

General

Brand	HP
Model	530
Category	Laptop
Language	English