HP 530 User Manual

9-83
Command Line Reference
Web Authentication Commands
Example
web-auth (WLAN Screen Customization)
These commands customize the text fields in the three Web-Auth screens
presented to the user during the Web Authentication process on the selected
WLAN:
■ The Login screen,
■ The Welcome (Success) screen,
■ The Failed Authentication screen.
The no version of a command clears the field value.
ProCurve Access Point 530(radio1-wlan1)# web-auth guest-login
ProCurve Access Point 530(radio1-wlan1)# web-auth username-login
ProCurve Access Point 530(radio1-wlan1)# web-auth retry-limit 3
ProCurve Access Point 530(radio1-wlan1)# web-auth redirect-url www.procurve.com
ProCurve Access Point 530(radio1-wlan1)# show wlan 1
WLAN # 1 on Radio 1
Description Radio 1 - WLAN 1
Status Enabled SSID PR3_WLAN
VLAN 1 - Untagged BSSID 00:14:C2:A7:11:A0
DTIM Period 2
Security Type wpa-psk (WPA-PSK) Closed System Disabled
MAC Auth Mode local accept-list only MAC Auth List ACL 1
Authentication open-system only WEP Key Type hex
WEP Key 1 not set WEP Key Size 128bit
WEP Key 2 not set Default Key WEP Key 1
WEP Key 3 not set
WEP Key 4 not set
WPA or WPA2 WPA and WPA2 WPA Cipher TKIP only
WPA Pre-auth. Disabled
WPA Shared Key abcdefghijklmnop
Web Authentication
Status Enabled Retry Limit 3
Username/Password Login Enabled Guest Login Enabled
Redirect URL www.procurve.com
Default Login Page Enabled
Default Login Failed Page Enabled
Default Welcome Page Enabled
RADIUS
...

HP 530 Specifications

General

Brand	HP
Model	530
Category	Laptop
Language	English