82410 • 82710 • 82910 WSM, 12271
[3] GENERAL PRECAUTIONS
G GENERAL
• During disassembly, carefully arrange removed parts
in
a clean
area to prevent confusion later. Bolts and nuts should be
installed
in
their original position to prevent reassembly errors.
• When special tools are required, use KUBOTA genuine special
tools. Special tools which are not frequently used should be
made according to the drawings provided.
• Before disassembling or servicing electrical wires, always
disconnect the ground cable from the battery first.
• Remove oil and dirt from parts before measuring.
• Use only KUBOTA genuine parts for parts replacement to
maintain tractor performance and to assure safety.
• Gaskets and O-rings must be replaced during reassembly.
Apply grease to new O-rings or oil seals before assembling.
See the figure left side.
• When reassembling external snap rings or internal snap rings,
they must be positioned so that sharp edge faces against the
direction from which a force
is
applied. See the figure left side.
• When inserting spring pins, their splits must face the direction
from which a force is applied. See the figure left side.
• To prevent damage
to
the hydraulic system, use only specified
fluid or equivalent.
(A)
(B)
(1)
Grease
(2)
Force
(3)
Sharp Edge
(4)
Axial Force
(5)
Rotating Movement
(A) External
Snap
Ring
(B) Internal
Snap
Ring
qopo
®
11790F00050
11790G00030
[4] HANDLING PRECAUTIONS FOR ELECTRICAL PARTS AND WIRING
11790F00060
To ensure safety and prevent damage to the machine and
surrounding equipment, heed the following precautions in handling
electrical parts and wiring.
• IMPORTANT
•
Check
electrical
wlrmg
for
damage
and
loosened
connection
every
year.
To
this
end,
educate
the
customer
to
do
his
or
her
own
check
and
at
the
same
time
recommend
the
dealer
to
perform
periodic
check
for
a fee.
• Do
not
attempt
to
modify
or
remodel
any
electrical
parts
and
wiring.
• When
removing
the
battery
cables,
disconnect
the
negative
cable
first.
When
installing
the
battery cables,
connect
the
positive
cable
first.
(1)
Negative Terminal
G-3
(2)
Positive Terminal
11790G00041
To Next Page
Loading...
Need help?
General
