Kubota B2910 User Manual

B2410· B2710· B2910 WSM, 12271
(2) Fuel Filter
1 ENGINE
The fuel filter is installed between the fuel tank and
fuel
lift pump, and serves to remove dirt and impurities
from the fuel.
Fuel from the fuel tank enters the outside of the filter
element (2) and passes through the filter element under
its own pressure. As it passes through, the dirt and
impurities
in the fuel are filtered out, allowing only clean
fuel to enter the interior of the filter element. The fuel
exits from the outlet of the filter bracket
(1) and is sent to
the fuel lift pump.
And to prevent the fuel from flowing out when the
element was removed, the valve
(4) is installed in this
filter.
12280F10050
Type of filter element
Filter mesh
(1) Filter Bracket
(2) Filter Element
1-M13
According-pleated paper type
20
to 40 11m
0.00079 to 0.00157 in.
(3) Filter Cap
(4) Valve
12280M10070

Kubota B2910 Specifications

General

Fuel Type	Diesel
Transmission Type	Hydrostatic
Hydraulic System	Open center
3-Point Hitch	Category I
Lift Capacity	1, 323 lbs (600 kg)
Drive	4WD
Engine Type	Diesel, 4-cycle, liquid-cooled
Horsepower	30 hp
Number of Gears	Infinite (3 ranges)
Wheelbase	63 inches
PTO Horsepower	22 hp